Kyocera ECOSYS M2530dn Operation Manual page 35

Selecting the Density
Density:
4 v Lighter -1
5 *w
*********************
Normal
6 y
Darker
Send Start
IMPORTANT:
•
•
6
Adjusting the density when scanning originals
•
1
2
3
4
a b
0
+1
5
7
Press the Start key. Transmission begins.
Checking the Send Status
1
2
3-7
If you select a high resolution, the image becomes
clearer. However, the higher the resolution is, the
longer the send time is.
When you send originals at a resolution of 200 × 400
dpi (Super Fine) or higher, the fax machine on the
receiving system needs to be capable of receiving
the originals at such image quality. When the
receiving system does not have such capability,
originals are sent at an image quality of 200 × 200
dpi (Fine).
-4 to +4: You can adjust the density using nine
levels.
Press the Function Menu key.
Press the  or  key to select [Density].
Press the OK key.
Press the  or  key to select the desired density.
Press the OK key.
Press the Status/Job Cancel key.
Press the  or  key to select [Send Job Status].
FAX Operation (Basic)
3