Kyocera ECOSYS M2530dn Operation Manual page 71

Forwarding Time Setting
Register the start time and end time between which forwarding is enabled.
Forward Time:
1 *All day
*********************
2 Preset Time
File Format Setting (for Each Requirement)
If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), select PDF, TIFF or XPS
as the file format.
1
Press the System Menu/Counter key.
2
Press the  or  key to select [FAX].
3
Press the OK key.
4
Press the  or  key to select [Reception].
5
Press the OK key.
6
Press the  or  key to select [Forward Settings].
7
Press the OK key.
8
Press the  or  key to select [Forward Time].
9
Press the OK key.
10
Press the  or  key to select [All day] or [Preset Time].
a b
11
Press the OK key. Proceed to the next step if you
selected [Preset Time] in step 10.
12
Press the  or  key to move the cursor position, and
enter the hours and minutes of the start time.
13
Press the OK key.
14
Press the  or  key to move the cursor position, and
enter the hours and minutes of the end time.
15
Press the OK key.
NOTE:
Enter the time on the 24 hours system.
1
Press the System Menu/Counter key.
2
Press the  or  key to select [FAX].
3
Press the OK key.
4
Press the  or  key to select [Reception].
5
Press the OK key.
4-17
FAX Operation (Advanced)
4