Kyocera ECOSYS M2530dn Operation Manual page 87

Using Polling Transmission
Function
Original Size
Original Image
Scan Resolution
Orig. Orientation
Continuous Scan
File Name Entry
Job Finish Notice
5
Press the OK key.
6
Press the  or  key to select [OverwriteSetting].
7
Press the OK key.
8
Press the  or  key to select [Allowed] or [Not
Allowed].
9
Press the OK key.
1
Press the Document Box key.
2
Place the originals.
3
Press the  or  key to select [Polling Box].
4
Press the OK key.
5
Press the  or  key to select [Store File].
6
Press the OK key.
7
Press the Function Menu key.
8
Change the required functions for the original to be
stored. For information on using the functions, refer to
the machine's Operation Guide.
Description
Select the size of originals to be scanned. Be sure to select
the original's size when using custom size originals.
Select image quality.
Chooses the level of detail used for scanning originals.
To ensure that the originals are stored in the correct
orientation, this indicates which end of the original is the top.
To use the following functions, select the orientation of the
originals.
• Duplex
Allows you to divide originals that cannot be placed in the
document processor at one time into multiple scans and then
store the result as a single file. With this function, originals
continue to be scanned until you press [END Scan] (the
Right Select key).
Allows you to rename the files created from scanned
originals. You can also use this function to add the job
number and/or date.
Sends a notice by an e-mail when a transmission is
complete.
4-33
FAX Operation (Advanced)
4