Kyocera ECOSYS M2530dn Operation Manual page 96

Communication modes subject to job accounting
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling transmission
• Polling reception
• Network FAX transmission
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the following operations.
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Output from Sub Address Box
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling transmission
• Polling reception
• Network FAX transmission
IMPORTANT: You can use 'Make a call', 'Checking FAX Job History' and 'Communication Control Report Output'
functions without entering an Account ID or Administrator No.
When job accounting has been enabled, batch transmission function works only for communication to be performed
for the same Account ID. The communication to be performed with a different Account ID is not conducted as a batch
transmission.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job accounting
has been enabled, and you send originals after entering an Account ID, the Account Name is printed.
4-42
FAX Operation (Advanced)