Replace The Lcd Assembly By Following The Steps In On Page; Replace The Keyboard By Following The Steps In Page; Replace The Keyboard Cover By Following The Steps In Cover" On Page; Replace The Hard Drive By Following The Steps In Page - Gateway P-79 Service Manual

110
CHAPTER 3: Replacing notebook components
12
Remove the touchpad board bracket from the notebook.
13
Remove the touchpad board from the notebook.
14
Place the new touchpad board into the notebook in the same orientation as the old
board.
15
Replace the screws removed in
16
Make sure the brown touchpad connector clip is up, insert the cable into the
connector, then swing the clip down to lock the connector in place.
Important
The touchpad cable is correctly oriented if the blue side is showing.
17
Replace the palm rest by following the steps in
page 104.
18
Replace the LCD assembly by following the steps in
on page 90.
19
Replace the keyboard by following the steps in
page 78.
20
Replace the keyboard cover by following the steps in
cover" on page 75.
21
Replace the hard drive by following the steps in
page 69.
Step 9.
"Replacing the palm rest" on
"Replacing the LCD assembly"
"Replacing the keyboard" on
"Replacing the hard drive" on
"Replacing the keyboard