Replacing The Lcd Panel Assembly - Gateway M350 Service Manual

Replacing the LCD panel assembly

Tools you need to complete this task:
Screws removed during this task:
4 chrome 2.5 × 2.5 mm
(keyboard)
To replace the LCD panel assembly:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
on page 6.
2
Turn the notebook over so the bottom is facing up.
3
Remove the battery by following the instructions in
battery" on page
4
Turn the notebook over so the top is facing up.
5
Remove the keyboard cover by following the instructions in
the keyboard cover" on page
Flat-blade driver - OR -
Phillips #0 screwdriver
4 black 2.5 × 5 mm
(hinge covers)
7.
19.
www.gateway.com
Replacing the LCD panel assembly
Scribe or non-marring tool
4 chrome 2.5 × 6 mm
(LCD panel hinges)
"Preparing the notebook"
"Removing the
"Replacing
45