Replacing The Hard Drive - Gateway P-79 Service Manual

Replacing the hard drive

Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
•
To replace the hard drive:
1
Complete the steps in
2
Loosen the hard drive bay cover screws (these screws cannot be removed).
3
Use the thumb notch to lift the hard drive bay cover, then remove it. Be careful not
to break off the tabs located on the end of the cover opposite the thumb notch.
www.gateway.com
1 chrome M3x3 (Hard drive bracket)
"Preparing the notebook" on page 57.
69