Replacing the LCD panel hinges and bracket
v
98
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
•
2 black M2.5×3 (Keyboard cover)
•
•
3 black M2.5x3 (Keyboard)
•
2 long black (Keyboard)
•
2 black M2.5×8 (Hinge bottom)
•
2 black M2.5×8 (Hinge top)
•
•
•
2 black M2.5×5 (inverter)
•
To replace the LCD panel hinges:
1
Complete the steps in
2
If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in
3
Remove the keyboard cover by following the steps in
cover" on page
75.
4
Remove the keyboard by following the steps in
page
78.
5
Remove the LCD assembly by following the steps in
on page
90.
- OR -
6 black M2.5×8 (LCD front panel)
6 black M2.5×8 (LCD front panel)
4 black M2.5x5 (LCD panel to LCD panel lid)
6 black M2x3 (LCD bracket to LCD panel)
"Preparing the notebook" on page
"Replacing the IEEE 802.11 wireless card" on page
Scribe or non-marring tool
57.
"Replacing the keyboard
"Replacing the keyboard" on
"Replacing the LCD assembly"
65.