Replacing The Lcd Assembly Lid - Gateway P-79 Service Manual

Replacing the LCD assembly lid

v
102
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
•
2 black M2.5×3 (Keyboard cover)
•
•
3 black M2.5x3 (Keyboard)
•
2 long black (Keyboard)
•
2 black M2.5×8 (Hinge bottom)
•
2 black M2.5×8 (Hinge top)
•
•
2 black M2.5×5 (inverter)
•
2 black M2×3 (Webcam)
•
2 black M2.5×5 (Lid latches)
•
To replace the LCD assembly lid:
1
Complete the steps in
2
If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in
3
Remove the keyboard cover by following the steps in
cover" on page 75.
4
Remove the keyboard by following the steps in
page 78.
5
Remove the LCD assembly by following the steps in
on page 90.
6
Remove the inverter by following the steps in
7
Remove the web cam by following the steps in
8
Remove the lid latches by following the steps in
page 87.
9
Remove the LCD panel from the old LCD panel lid by following the steps in
"Replacing the LCD panel" on page
10
Remove the LCD panel brackets from the old LCD panel lid by following the steps
in "Replacing the LCD panel hinges and bracket" on page
- OR -
6 black M2.5×8 (LCD front panel)
6 black M2.5×8 (LCD front panel)
4 black M2.5x5 (LCD panel to LCD panel lid)
"Preparing the notebook" on page
"Replacing the IEEE 802.11 wireless card" on page
94.
Scribe or non-marring tool
57.
"Replacing the keyboard
"Replacing the keyboard" on
"Replacing the LCD assembly"
"Replacing the inverter" on page
"Replacing the webcam" on page
"Replacing the lid latches" on
98.
65.
81.
84.