Replacing The Ieee 802.11 Wireless Card - Gateway P-79 Service Manual

Replacing the IEEE 802.11 wireless card

Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
•
2 blackM2x3 (IEEE 802.11 wireless card)
To replace the IEEE 802.11 wireless card:
1
Complete the steps in
2
Loosen the memory bay cover screws (these screws cannot be removed).
3
Use the thumb notch to lift the memory bay cover, then remove it. Be careful not
to break off the tabs located on the end of the cover opposite the thumb notch.
www.gateway.com
"Preparing the notebook" on page 57.
65