Default Id Transmission; Selecting Transmission Options For A Single Transmission - Ricoh C2408 Operating Instructions Manual

Important
❒ If you turn this function off, the
scale of the original is maintained
and some parts of the image may
be deleted when printed at the oth-
er end.
Note
❒ You can switch this function on and
off with "Gen. Settings/Adjust".
See p.102 "General Settings/Ad-
justment". It is convenient to set
frequently used settings in the
General Settings/Adjustment and
use "Transmission Options" for
occasionally used settings.

Default ID Transmission

If you turn this function on, transmis-
sion will only take place if the desti-
nation's Polling ID is the same as
yours. This function can stop you
from accidentally sending informa-
tion to the wrong place (you need to
coordinate Polling ID's with the other
party).
Note
❒ You can switch this function on and
off with "Gen. Settings/Adjust".
See p.102 "General Settings/Ad-
justment". It is convenient to set
frequently used settings in the
General Settings/Adjustment and
use "Transmission Options" for
occasionally used settings.
Selecting transmission options for a
single transmission
Press [Sub TX Mode] ⇒ [Options].
A A A A
Select options to be set up.
Programming the Fax Header
Print
A Press [ON] to specify "Fax
Header Print".
Note
❒ To close the option settings,
B
go to step
Programming the Label Insertion
A Press [Programed Name] in "La-
bel Insertion".
Note
❒ To close the option settings,
B
go to step
Sub Transmission Mode
.
.
4
55