Ricoh C2408 Operating Instructions Manual page 635

❖ ❖ ❖ ❖ ID Override Transmission
You must enter an Override Poll-
ing ID unique to this transmission.
This ID overrides that stored in the
Polling ID. The user must supply
this ID when they poll your ma-
chine. If the IDs match, the mes-
sage is sent. Make sure the other
end knows the ID you are using in
advance.
Limitation
❒ Polling Transmission is allowed
only if the receiver's machine has
the Polling Reception feature.
❒ Usually, only machines of the
same make that support Polling
Reception can perform ID Polling
Transmission. However, when the
Information Box File functions is
used, and the other party's fax ma-
chine supports Polling Transmis-
sion and the "SEP" feature, you
can still carry out a Polling Trans-
mission with an ID. See p.29 "In-
formation Boxes".
Note
❒ Free Polling and Default ID Trans-
mission allow only one file to be
stored in memory.
❒ ID Override Polling Transmission
allows a file to be stored in memo-
ry for each ID; a total of up to 400
files (800 with the optional Fax
Function Upgrade unit) for vary-
ing ID's can be stored.
❒ Before using "Default ID Trans-
mission", you need to program the
Polling ID. See p.133 "Program-
ming a Polling ID".
Extending Function Transmission
❒ You can set whether a Polling
Transmission file is deleted after
transmitting in "User Parameters".
To save the file to transmit repeat-
edly, set to "Standby (Save)". See
p.113 "Changing the User Parame-
ters" (Switch 11, Bit7).
❒ The communication fee is charged
to the receiver.
Press [Transmission Mode] ⇒ [Polling
TX].
A A A A
Depending on the Polling Trans-
mission mode, use one of the fol-
lowing procedures:
Free Polling TX
A Check that [Free Polling TX] is se-
lected.
Note
❒ If [Free Polling TX] is not se-
lected, press [Free Polling TX].
Default ID TX
A Select [Default ID TX].
ID Override Transmission
A Select [ID Override Transmission].
1
9