Deleting Transfer Boxes - Ricoh C2408 Operating Instructions Manual

Key Operator Setting
D D D D
Enter a SUB Code.
Note
❒ To change SUB Code, press
[Clear] or the { { { { Clear/Stop} } } } key
and try again. To change Box
Name, press [Box Name], and
then repeat from step
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key
and try again.
E E E E
Specify the condition of registra-
tion.
Programming Receiving Stations
A Select Receiving Station.
8
Note
❒ You can store 5 Receiving
Stations.
B Specify Receiving Stations
with Quick Dials.
Note
❒ You can also specify Receiv-
ing Stations with Group Di-
als.
C Press [OK].
Repeat from step A to specify
another Receiving Station.
130
Programming a Password
If you do not want to program a
password, go to step
A Press [Password].
B Enter a password, and then
F F F F
Press [OK].
A box mode is shown next to the
box.
C
.
Return to the initial display.

Deleting Transfer Boxes

Limitation
❒ If the specified SUB Code is not
programmed as a Transfer Box, or
messages are programmed in the
box, you cannot delete the box.
Press the { { { { User Tools/Counter/Inquiry} } } }
key. See p.9 "Control Panel", Facsimile
Reference (option) <Basic Features>.
And then press [Facsimile Features] ⇒
[Key Operator Tools] ⇒ [Box Setting].
A A A A
Press [Delete] and select a box you
want to delete.
F
press [OK].
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key
and try again.
.