Table of Contents
Advertisement
Section II Wizard
Click Wizard in Status page, will pop up following page to configure the operation mode and there
are explanation for each operation mode for better application.
Gateway Mode
In this mode,the device is supposed to connect to internet via ADSL/Cable Modem.The NAT is
enabled and PCs in LAN ports share the same IP to ISP through WAN port.The connection type can
be setup in WAN page by using PPPOE,DHCP client or static IP.
Static IP setting in Gateway Mode
1. Sample Static IP mode setting method, then click next to continue.
(Please contact with ISP for correct IP address and DNS address)
9
Advertisement
Table of Contents
