Chapter 1 Hardware And Operation Mode Instruction; Led Indicator; Ap Interface; Power Supply - LevelOne WAP-6121 User Manual

Chapter 1 Hardware and Operation mode Instruction

1.1

LED indicator:

Gree n : P o we r I nd i cato r
B lu e: Wi Fi I nd ic ato r
1.2

AP Interface:

RST: Reset Button, it make AP revert to default data after press it 15 seconds.
WAN: WAN Port, connect with ADSL modem or Internet mainly. It will be LAN port under Wireless AP and
WiFi Repeater operation mode
LAN: LAN Port to end users
LED: LED Indicator of WAN port and LAN port
DC: DC power connector
1.3

Power Supply:

The connection diagram shows as P2, Internet cable from PoE Switch to Ceiling AP's WAN Port, then PC
access into ceiling AP wired/wireless.
Pls note the PD wireless AP support 48V IEEE 802.3af standard PoE, the PoE switch should comply with
802.3af 48V PoE standard.

1.4 AP Installation:

For the Ceiling Wireless AP, will be installed under ceiling based on following steps:
P 1
P2
4