Chapter 2 Installation; Requirements; Procedure - LevelOne WBR-2400TX User Manual

Chapter 2
Installation
This Chapter covers the physical installation of the LevelOne 22Mbps Wire-
less AP Router.

Requirements

•
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
•
TCP/IP protocol must be installed on all PCs.
•
For Internet Access, an Internet Access account with an ISP, and either a DSL or Cable
modem (for WAN port usage).
•
To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b specifications.

Procedure

1. Choose an Installation Site
Select a suitable place on the network to install the LevelOne 22Mbps Wireless AP
Router.
Ensure the LevelOne 22Mbps Wireless AP Router and the DSL/Cable modem are pow-
ered OFF.
Figure 4: Installation Diagram
6