Ch 3. Detail Configuration
Setup Wizard
This device has a Setup Wizard helps you to configure it easily. For the first time setup, we
suggest using wizard to setup. After login the device, the status page and the menu in the
left panel shows. Click the "Wizard" in the left panel to start the setup wizard.
Select the mode:
In the first page of the wizard, there are five modes for selection. It determines how the
device works. Refer to the explanation below to understand the modes. Choose one to
continue.
AP Mode:
This is the default configuration that allows you to connect to WAP-6010 as a
wireless client. This mode adds wireless functionality to your wired network.
AP Client Mode:
WAP-6010 retrieves the signal from a Wireless AP or Router and shares it to the
wired Ethernet ports on a PC or switch. WAP-6010 will not accept wireless clients in
this mode.
Bridge Mode:
In Bridge Mode, WAP-6010 communicates using BSSID (MAC addresses) to create
a point-to-point or point-to-multi-point connection between 2 or more access points
to help join LANs together. WAP-6010 will not accept wireless clients in this mode.
WDS Mode:
9