Acceleration/Deceleration Time Selection; Motor Rotation Direction Selection - Omron SYSDRIVE 3G3HV SERIES User Manual

Preparing for Operation
n027
Frequency Reference 3
Setting range 0 to maximum
frequency
n028
Frequency Reference 4
Setting range 0 to maximum
frequency
S The inching frequency reference must be set with n029 if an inching frequency is required. The
inching command must be selected to use the inching frequency reference. Refer to page 3-17,
Multi-function Input Selection (n035 to n039) for details.
n029
Inching Frequency Reference
Setting range 0 to maximum
frequency
H Acceleration/Deceleration Time Selection (n019 to n022)
S Acceleration time and deceleration time can be set with n019 to n022.
S The acceleration/deceleration time switching command must be selected to use acceleration time
2 and deceleration time 2. Refer to page 3-17, Multi-function Input Selection (n035 to n039) for
details.
n019
Acceleration Time 1
Setting range 0.0 to 3,600
n020
Deceleration Time 1
Setting range 0.0 to 3,600
n021
Acceleration Time 2
Setting range 0.0 to 3,600
n022
Deceleration Time 2
Setting range 0.0 to 3,600
Set Values
S Acceleration time: The time required for the output frequency to be 100% from 0% of the maxi-
S Deceleration time: The time required for the output frequency to be 0% from 100% of the maxi-
S Acceleration time 2 and deceleration time 2 is available if the acceleration/deceleration time
switching command is set.
H Motor Rotation Direction Selection (n005 and n006)
S Set the rotation direction of the motor with n005 so that the motor will rotate in the set direction
when the forward rotation command is input.
3-16
Unit
Unit
Unit
Unit
Unit
Unit
Unit
mum frequency.
mum frequency.
Set with n024 Default setting
Set with n024 Default setting
Set with n024 Default setting
s Default setting
s Default setting
s Default setting
s Default setting
Chapter 3
0.0
0.0
6.0
10.0
10.0
10.0
10.0