Omron SYSDRIVE 3G3HV SERIES User Manual page 202

High-capacity general-purpose inverter
Hide thumbs Also See for SYSDRIVE 3G3HV SERIES:
Table of Contents

Advertisement

Appendix
Function
No.
Energy-saving
n095
control
n096
n097
n098
n099
n100
n101
n102
Not used
n103
n104
n105
n106
n107
n108
Note Default settings vary with the Inverter model.
Name
Energy-saving
0: Inhibits the Inverter from performing en-
control selec-
ergy-saving control.
tion
1: Permits the Inverter to perform energy-
saving control.
Energy-saving
Set coefficient so that maximum motor effi-
coefficient K2
ciency will be obtained.
Set lower limits of energy-saving control
Energy-saving
output voltage in 1% units at 6 Hz and
voltage lower
limit for 60 Hz
60 Hz based on motor rated voltage set
with n011 as 100%, in which case, lower
limit of energy-saving control output volt-
limit of energy-saving control output volt-
Energy-saving
age will be on a straight line linking values
voltage lower
set with n097 and n098 if energy-saving
limit for 6 Hz
control output frequency is between 6 and
60 Hz.
Mean power
Set time to calculate mean output power of
time
Inverter performing energy-saving control.
Time (ms) = 25 x n099
Search control
Set range of variable voltage in 1% units to
voltage limit
be used by Inverter in search control mode
based on rated motor input voltage as
100%.
Search operation function will be invalid if
n101 is set to 0.
Search control
Set range of variable voltage in 1% units to
voltage step
be used by Inverter in search control mode
when 100%
with 100% search operation start voltage
based on rated motor input voltage as
100%.
Search control
Set range of variable voltage in 1% units to
voltage step
be used by Inverter in search control mode
when 5%
with 5% search operation start voltage
based on rated motor input voltage as
100%.
Not used
Do not change setting.
Not used
Do not change setting.
Not used
Do not change setting.
Not used
Do not change setting.
Not used
Do not change setting.
Not used
Do not change setting.
Description
Chapter 6
Setting
Refer-
ence
range
page
0, 1
3-26
[0]
0.00 to
3-26
655.0
(See
note)
0 to
3-27
120
[50]
0 to 25
3-28
[12]
1 to
3-28
200
[1]
0 to
3-27
100
[0]
0.1 to
3-28
10.0
[0.5]
0.1 to
3-28
10.0
[0.2]
1 [1]
---
1 [1]
---
0 [0]
---
0 [0]
---
2 [2]
---
1 [1]
---
6-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents