Appendix
Function
No.
Motor rotation
n005
direction
selection
n006
6-6
Name
Forward/Re-
0: When the forward rotation command is
verse rotation
input, the motor seen from the load
selection
side rotates counterclockwise.
1: When the forward rotation command is
input, the motor seen from the load
side rotates clockwise.
Note This parameter is not initialized when
parameter initialization is performed
by setting n001 to 6 or 7. (It is only ini-
tialized when a CPF4 error is
detected.)
Reverse rota-
0: The motor can rotate in reverse.
tion-inhibit
1: The motor cannot rotate in reverse.
selection
Description
Chapter 6
Setting
Refer-
ence
range
page
0, 1
3-17
[0]
0, 1
3-17
[0]