Table of Contents
Advertisement
[PTZ] Page
This page allows you to specify the Move Preset
Position and Auto Flip settings.
This page can be used during access using
"admin" or "operator".
Click [Advanced Settings] in the side menu, and
0
click [PTZ].
Press the [OK] button to enable the new
0
settings.
If the [OK] button is pressed upon entering an
0
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
Settings
.
* Setting values with R are default values.
Limit
9 EZoom Limit
When the zoom lens is operated to TELE side,
optical zoom works and electronic zoom works
after optical zoom becomes full. This item sets the
maximum value of the electronic zoom function.
[Set values: 1, R2, 4, 8, 10]
Memo :
As electronic zoom processes the images
0
digitally, image quality will deteriorate slightly
Increasing the electronic zoom ratio will shift the
0
center of the screen toward the top left. This is a
characteristic of this camera and is not a
malfunction.
During continuous zoom operation, there is a
0
one-second pause when the electronic zoom
switches to optical zoom. This is intended to
mark the boundary between electronic and
optical zoom, and is not a malfunction.
9 Pan Limit
This item sets the movable range of the pan
(horizontal) operation during manual operation
when "ON" is selected. It is invalid when "OFF" is
selected.
[Set values: ON, ROFF]
[Set Left], [Set Right]:
0
Click these buttons to set the current position to
the left or right edge.
[Go to Left], [Go to Right]:
0
Click these buttons to move the camera to the
preset left or right edge.
Memo :
This item does not affect the preset position and
0
auto pan operation.
Basic operation of Pan Limit
When [Pan Limit] is set to "ON", panning is only
available in the effective area.
When the camera is moved to prohibited area by
some operation that has priority over [Pan
Limit] and manual panning is performed, it
operates in the following manner.
Memo :
Panning can be operated freely even in the
0
prohibited area before the camera enters the
effective area.
Once the camera enters the effective area, the
0
[Pan Limit] settings take over and pan
operation can only be performed in the
effective area.
Operations that have priority over Pan Limit
The following operations are available
regardless of the prohibited areas set in [Pan
Limit].
Auto Pan
0
Move Preset Position
0
Auto Flip
0
Settings that have priority over Pan Limit
The following setting comes together with pan
operation but they can be set regardless of the
prohibited areas even when [Pan Limit] is set to
"ON".
Auto Pan setting
0
Memo :
When setting Preset Position with [Pan Limit]
0
set to "ON", panning operation is disabled in
the prohibited area.
As Move Preset Position has priority over
0
manual pan limit, setting the manual pan limit
after setting Preset Position does not prevent
Preset Position operation in the prohibited
area.
[Advanced Settings] Page -[PTZ] Page
43
Advertisement
Table of Contents
