Table of Contents
Advertisement
9 Day/Night
This is enabled when "Day/Night" is selected for the
[Trigger1] item.
Color:
0
Executes alarm recording when the image
switches from black-and-white to color.
Black & White:
0
Executes alarm recording when the image
switches from color to black-and-white.
[Set values: Color, Black & White]
9 Time
Displayed when "Time" is selected in [Trigger1].
Executes alarm recording at the time you have
entered.
[Set values: 00H00M to 23H59M]
Encode Setting
Select the H.264 encoder No. for performing
microSD card recording.
Specify the encoding settings in the [Encoding]
page.
(A p.52 [[Encoding] Page] )
Memo :
Recordable frame rates are limited to 5, 10, 15,
0
and 30 fps. If a frame rate other than those above
is specified, a dialog box appears, and recording
will not start. If this occurs, review and adjust the
settings accordingly.
(A p.52 [[Encoding] Page] )
Set the I-frame interval to a value equivalent to
0
the frame rate. Otherwise, a dialog box will
appear.
[Advanced Settings] Page - [microSD Card Recording] Page
66
[PTZ] Page
This page allows you to specify the Auto Return,
Move Preset Position and Auto Flip settings.
This page can be used during access using
"admin" or "operator".
Click [Advanced Settings] in the side menu, and
0
click [PTZ].
Press the [OK] button to enable the new
0
settings.
If the [OK] button is pressed upon entering an
0
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
Settings
* Setting values with R are default values.
Auto Return
If the manually-controlled camera is not operated
over the duration that was set in "Return Time", it
will automatically be restored to the state that was
set in "Mode".
Mode
This item sets the operation after Auto Return.
OFF:
0
Auto Return is disabled.
Home:
0
Returns to the home position.
Auto Pan:
0
Returns to the Auto Pan operation.
Auto Patrol0 to 2:
0
Returns to the Auto Patrol operation.
Auto Trace:
0
Returns to the Auto Trace operation.
[Set values: ROFF, Home, Auto Pan, Auto Patrol0
to 2, Auto Trace]
Advertisement
Table of Contents
