Murano Glass Fire Installation - Valor 1700IN Installation & Owner's Manual

6. Place centre cross log to rear log as indicated. Pivot
tail end so tip is just inside fi replace window line.
Long Beach Driftwood Kit installed
Material required
• Middle platform brackets (supplied with appliance)
• Small container to distribute fi re glass
• Murano Glass Fire Kit, which contains:
◊ 2 bags of blue azura fi re glass
◊ 1 bag of black fi re glass
◊ 1 glass platform
◊ 8 pieces glass panels
IMPORTANT: For safety reasons, use only the fi re
glass provided with your Valor fi replace or the tem-
pered crushed fi re glass brands American Fireglass™
or fi regear. The use of any other fi re glass products
may void your fi replace warranty.
Long Beach Driftwood Kit Installation

Murano Glass Fire Installation

7. Some vermiculite may be added outside the burner
on the platform if desired.
8. Place the rocks on the platform as shown below.
You can also place one or two rocks on the
vermiculite as shown.
WARNING
!
CHOKING HAZARD! Ensure that the fi replace
area is clear of vermiculite particles as these could
be ingested by small children. Vacuum area after
installation.
Installation
Carefully unpack the kit.
1. Install both platform brackets on each side of the
burner, with the tabs downward fi tting the bracket
tabs into the burner support's slots as indicated.
Top
Bottom
QUALIFIED
INSTALLER
45