Closing (Arming) Reporting Codes; Opening (Disarming) Reporting Codes; Automatic Clock Adjust; First International Options - DSC PowerSeries PC1404 V1.1 Installation Manual

PC1404
Section Number Output Number
[557] PGM 7
[558] PGM 8
[559] PGM 9
[560] PGM 10
PC5204
[561] PGM 11
[562] PGM 12
[563] PGM 13
[564] PGM 14
[601] Closing (Arming) Reporting Codes, Access Codes 33-40
Code 33 Code 34
|___|___| |___|___|
[605] Opening (Disarming) Reporting Codes, Access Codes 33-40
Code 33 Code 34
|___|___| |___|___|

INTERNATIONAL PROGRAMMING

[700] Automatic Clock Adjustment
Default = 60 |______|_______| Valid Entries 00-99 Seconds

[701] First International Options

Note: Programming options indicated in
Opt Def. ON
1   50 Hz AC
2  Time Base - Internal Crystal
3  AC/DC Arming Inhibit Enabled

4 All System Tampers Require Installer Reset
5  6-digit User Access Codes
6  Busy Tone Detection Enabled
7-8  For Future Use

[702] Second International Options

Opt Def. ON
1  Pulse Dialing Make/Break Ratio is 33/67
2   Force Dialing Enabled
3  For Future Use
4  1600Hz Handshake
5  ID Tone Enabled
6  2100 Hz ID Tone

7 One-Time 1-Hour DLS Window

8 For Future Use

[703] Delay Between Dialing Attempts

Default = 003 |_______|_______|_______| Valid entries are 000-255 seconds (entry + 5 seconds)

[900] Panel Version

0 1 1 0
[901] Installer Walk Test Mode Enable/Disable
See [901] Installer Walk Test Mode Enable/Disable.

[902] Module Supervision Reset

See [902] Module Supervision Reset.

[903] View Module Supervision

See [903] View Module Supervision.

[990] Installer Lockout Enable

Enter [990] [Installer's Code] [990]
32
Zone Follower Zone
Code 35 Code 36
|___|___| |___|___|
Code 35 Code 36
|___|___| |___|___|
grey are CE defaults.
Not Programmable
Code 37 Code 38
|___|___| |___|___|
Code 37 Code 38
|___|___| |___|___|
OFF
  60 Hz AC
  Time Base - AC Line
  AC/DC Arming Inhibit Disabled
 
All System Tampers Follow Restore
  4-digit User Access Codes
  Busy Tone Detection Disabled
 
OFF
  Pulse Dialing Make/Break Ratio is 40/60
 Force Dialing Disabled
 
  Standard Handshake
  ID Tone Disabled
  1300 Hz ID Tone
 
6-Hour DLS Window
 
Code 39 Code 40
|___|___| |___|___|
Code 39 Code 40
|___|___| |___|___|