Programming The Function Keys - DSC PowerSeries PC1404 V1.1 Installation Manual

can hear the new tone. If the key is held down, every second the
keypad will increment the frequency and sound another tone.
There are 21 levels. Once the desired level is reached, press [*]
to exit.

Programming the Function Keys

The function keys are programed in sections [000][1-4]. By
default, the 4 function keys on the keypad are programmed as
Stay Arm (03), Away Arm (04), Chime (06), and Sensor Reset
(14). Activate the function keys as follows:
Function key 1 - Press and hold the #2 key for 2 seconds
Function key 2 - Press and hold the #5 key for 2 seconds
Function key 3 - Press and hold the #8 key for 2 seconds
Function key 4 - Press and hold the #0 key for 2 seconds
See Keypad Function Keys below for the other function key
options available for your system.
Emergency Key Options (Fire, Auxiliary, Panic)
You can enable or disable the Fire, Auxiliary and Panic keys at
each keypad. These keys are enabled by default. To turn any of
the emergency keys on or off on the keypad:
1. Enter [*][8][Installer Code].
2. Enter [000] to go to keypad programming.
3. Enter section [6].
4. To turn the emergency key options on or off, press [1], [2],
or [3]:
[1] ON=Fire key enabled
[2] ON=Auxiliary key enabled OFF=Auxiliary key disabled
[3] ON=Panic key enabled
5. When complete, press [#] to exit.
Activating Emergency Keys
• Fire Key
To activate a fire alarm, press and hold keys #1 and #3 simultane-
ously for 2 seconds.
• Auxiliary Key
To activate an auxiliary alarm, press and hold keys #4 and #6
simultaneously for 2 seconds.
• Police Key
To activate a police alarm, press and hold keys #7 & #9 simultane-
ously for 2 seconds.
Night Light Feature (available in PC1404RKZWH order
code)
White LEDs are on the left and right side of the keypad to make
the keypad easier to locate in the dark. To turn the night lights on
or off:
1. Enter [*][8][Installer Code].
2. Enter [000] to go to keypad programming.
3. Enter Keypad Toggle Options section [6].
4. Turn option 4 on or off to enable or disable the night light
feature.
5. When complete, press [#] to exit.
AC LED Options
The AC LED can be enabled or disabled, and can be configured
to indicate if AC is present or absent. To turn the AC LED on or
off:
1. Enter [*][8][Installer Code].
2. Enter [000] to go to keypad programming.
3. Enter Keypad Toggle Options section [6].
4. To turn the AC LED feature on or off, press 5.
5. To control whether the LED indicates AC present or absent,
press 6.
6. When complete, press [#] to exit.
Backlighting Intensity Adjustment
The keypad has 5 backlighting intensity settings. To adjust the
backlighting intensity:
1. Enter [*][8][Installer Code].
2. Enter [000] to go to keypad programming.
OFF=Fire key disabled
OFF=Panic key disabled
3. To adjust the intensity of the backlighting LEDs, repeatedly
press [9].
4. When complete, press [#] to exit.
Programming worksheet
[000] Keypad Programming
1.Enter [*][8][Installer Code].
2.Enter [000] to go to keypad programming.
[0] Keypad Enrollment
Valid entries are 01-18; e.g., enter [11] for partition 1, slot 1.
1st digit: Enter 0 to 8 for partition assignment (0 = Global Keypad).
2nd digit: Enter 1 to 8 for slot assignment
11
Default:
I _ _ _ _ _ _ _ _ _ I _ _ _ _ _ _ _ _ |
[1]-[4] Function Key Assignments
[1] Key 1 [2] Key 2 [3] Key 3
Defaults 03 04
Stay Away Chime
I _ _ _ _ _ _ _ _ _ I _ _ _ _ _ _ _ _ | I _ _ _ _ _ _ _ _ _ I _ _ _ _ _ _ _ _ | I _ _ _ _ _ _ _ _ _ I _ _ _ _ _ _ _ _ | I _ _ _ _ _ _ _ _ _ I _ _ _ _ _ _ _ _ |
Keypad Function Keys
[00] - Null key (key not used)
[01]-[02] - Not used
[03] - Stay arm
[04] - Away arm
[05] - [*][9] No entry arm
[06] - [*][4] Chime On/Off
[07] - Not used
[08] - [*]1]Bypass mode
[09] - [*]2] Trouble display
[10] - Not used
[11] - [*][5] User code programming [25] - Instant stay arm
[12] - [*][6] User functions
[6] Keypad Toggle Options
Option
1 [F] key enabled/disabled
2 [A] key enabled/disabled
3 [P] key enabled/disabled
4 Night light enabled/disabled: When enabled, the
white LEDs on each side of the keypad are acti-
vated. When disabled, the white LEDS on each
side of the keypad are deactivated.
5 AC LED enabled/disabled: When enabled, the
keypad's AC LED indicates either the presence or
absence of AC power to the control panel,
depending on the programming of option 6 in sec-
tion [000][6]. When disabled, the keypad's AC
LED remains off in all conditions.
6 AC LED on when AC present/AC LED on when
AC absent: This toggle option requires option 5 in
section [000][6], AC LED enabled/disabled, to be
enabled. When this option is on, the keypad's AC
LED turns on to indicate that the control panel has
AC power, and turns off to indicate that AC power
has been lost. When this option is off, the key-
pad's AC LED turns on to indicate that AC power
has been lost, and turns off to indicate that the
control panel has AC power.
7-8 Not used
2 Installation
[4] Key 4
06 14
Sensor
Reset
[13] - Command output 1 (*71)
[14] - Command output 2 (*72)/
Sensor reset
[15] - Not used
[16] - [*][0] Quick exit
[17] - [*][1] Activate stay/away
[18] - Not used
[19] - Command output 3 (*73)
[20] - Night arming
[21] - Command output 4 (*74)
[22]-[24] Not used
[26]-[32]- Not used