Riso ComColor 9150 Basic Manual page 77

5
Check that the specified area is properly located.
Check that the barcode and shaded parts are properly
located, and that no letters or illustrations are within 1 mm
(0.04") of the lines.
Request for Toner
Collection
z RISO KAGAKU CORPORATION
Correct Specification
z Surround the barcode with a margin of around 1 mm
(0.04") or more
1 mm
(0.04")
zDo not surround an area smaller than the barcode
z Do not surround an area which is not aligned with
the barcode
zDo not include another object with the barcode
Content other than the black lines included in the area
will be printed out white (disappear).
To change the specified barcode area, specify one
again. (p. 101)
6
Uncheck [Barcode area proof], and click [OK].
How to Use Useful Functions >> Printing Function Operations
7
Click [OK] (or [Print]) on the print screen.
Specified
barcode
area
(shaded
part)
OK
NO
NO
NO
ComColor Series Basic Guide 06
3
75