Riso ComColor 9150 Basic Manual page 108

6
Activate the barcode application.
Click [Start]-[All Programs]-[RISO]-[Barcode Area Definition
Software].
7
Using the barcode application, open the file you
have saved in step 5.
Specify the number of pages to read (Specify whether to read
30 straight pages or the pages you wish to read).
8
Click [OK].
The print image of an original appears in the image/barcode
area.
If you use mixed-size data, the original data is
oriented differently from the print image. Select
[View]-[Rotate right 90°/Rotate left 90°] in the
"menu bar", rotate the print image in the same
direction as the original data, and specify the
barcode area.
106
9
Surround the barcode with the
on the screen.
The surrounded area is colored and specified as the barcode
area.
Edit the barcode area using the edit tools and menu bar
functions.
• You can specify 50 barcodes per page, or areas as
large as 30 pages. If you specify [Cycle], you can
apply areas repeatedly.
• You can specify [Cycle] on 1 to 999 pages. You can
apply area definition information to the entire
page using the specified pattern. See "Usage
Examples of the Repetition Function" (p. 108) for
details.
• The pages after the specified one do not appear
on a thumbnail due to repeated processing.
• Barcode areas can move on the same page using
(selection tool). To move them to the next
page, copy and paste them. You cannot paste the
specified barcode area if it is larger than the
original.
10
Save the barcode area definition file using
(Save) or [Save as] in the [File] menu.
The file is output (saved) in CSV format.
Barcode position and size of printouts are specified
by the base point, the left top of the original data
created on a PC, "Coordinate (X, Y)" and "Size (H, W)"
specified in CSV format. (At 1mm intervals)
Base point
x
Request for Toner Collection
y
RISO KAGAKU CORPORATION
(creation tool)
H
W
ComColor Series Basic Guide 06