Riso ComColor 9150 Basic Manual page 109

About how the specifi ed areas look
If you surround using (creation tool)
If you select using (selection tool)
About the Thumbnail
The left top of a thumbnail image is a base point, and original image and barcode area defi nition image are overlapped.
If original image and barcode area defi nition image are not of the same size, a thumbnail shown below will be displayed.
To specify a barcode area on the part grayed out, align original image and barcode area defi nition image to the same
direction.
Original image (solid line) < Barcode area defi nition image (broken line)
The area outside barcode area defi nition image is grayed out.
Notes on Barcode Area Defi nition
If the position information on the specifi ed barcode area changes (e.g., if you rotate an image), the barcode area is not
correctly processed.
If you rotate an image or change the printing orientation, specify the barcode area defi nition using area creation tools.
(Correct the barcode area from the base point.)
x
Base point
y
If barcode processing has
operated correctly
x
Base point
y
If the rotation of an original has changed
the position information of a barcode
from the base point, and barcode
processing has not operated correctly
Scanning >> Scanner Mode Screens
ComColor Series Basic Guide 06
4
107