Riso ComColor 9150 Basic Manual page 59

[Staple/Punch]
When you have connected an optional multifunction
finisher, staple or punch holes in copies. If you specify [Staple
speed priority] in [Details] to [ON], stapling is conducted
without lowering the printing speed. But both ends of a
staple come out of the front. If the face down offset stapler is
connected, only Staple can be specified.
[Fold]
When you have connected an optional multifunction
finisher, copies can be folded.
[Booklet]
Automatically arrange pages on copies to create booklets.
When you have connected an optional multifunction
finisher, you can also specify stapling and folding.
[Imposition]
Arrange pages of the original in a booklet layout.
[Fold]
Create copies folded in two.
[Fold + Staple]
Create copies folded in two and stapled.
[Imposition] can be combined with [Fold] or [Fold +
Staple].
[Separate books]
z
When you have selected [Fold] and [Fold + Staple], some
restrictions apply to the number of sheets that can be folded at one
time.
[Fold] folds after 5 sheets (for 20 pages of originals), and [Fold +
Staple], after 15 sheets (for 60 pages of originals).
If the number of pages involved requires more sheets than this,
folding is done once after the number of sheets noted above to
produce an individual portion of the book, which is then ejected.
In this case, because the layout order varies depending on whether
these portions will be bound through the center or from the side,
choose [OFF] or [ON].
[OFF]
The layout is arranged so that each portion of the book fits inside
another portion when the book is bound (with a center binding).
Books are not stapled When you select OFF, even if you have also
selected [Fold + Staple].
[ON]
The layout is arranged so that each portion of the book is on top of
the next portion when the book is bound (from the side).
Example: 60-page original, [Fold], and [Separate books] OFF
Example: 60-page original, [Fold], and [Separate books] ON
ComColor Series Basic Guide 06
Basic use >> Copy Mode Screens
2
57