Riso ComColor 9150 Basic Manual page 34

4
Move the guides against the edges of the paper, and
push the lever to lock.
The machine detects the paper size at the positions
of the guides. Move the guides against the edges of
the paper, and push the lever to lock.
About the Paper Feed Pressure for the Standard Tray (High Capacity Feeder)
You can use the paper feed pressure adjustment lever to adjust the paper
feed pressure to suit the paper that you have set. The lever can be set to
" (NORMAL)" or "
When you change the position of the paper feed pressure adjustment lever,
also change [Feed ctrl.] in [Details] of the operation panel's [Feed Tray]. (See
p. 50.)
Paper Feed Pressure Adjustment Lever and Paper
The supported paper textures are as follows.
Lever Position
(NORMAL)
(CARD)
32
(CARD)" in accordance with the paper texture.
Paper Texture
Standard or thin paper
Thick paper or special
paper
5
Set the paper feed pressure adjustment lever.
Normally, keep this lever position to
set it to (CARD) for envelopes and similar paper.
6
On the operation panel, check the tray settings.
When you have switched to a different type or size of paper,
update the feed tray settings. For details, see "Feed Tray" (p. 50).
zThe Feed Tray
Supported Printing Paper
• Plain paper, recycled paper
• High-quality paper
• Drawing paper
• Postcards
If the machine's paper feeding is poor, set the lever position to [NORMAL].
(NORMAL) unless you
• Commercially available copy paper,
and similar media
• Envelopes
ComColor Series Basic Guide 06