Picklist Mode; Decode Session Timeout - Motorola Symbol DS6607 Product Reference Manual

Picklist Mode

Parameter # F0h 92h
Picklist mode enables the digital scanner to decode only bar codes that are aligned under the laser crosshair. Select one of the
following picklist modes for the digital scanner:
• Disabled Always - Picklist mode is always disabled.
• Enabled Out of Scanstand - Picklist mode is enabled when the digital scanner is out of Scanstand mode and disabled
when the digital scanner is in Scanstand mode.
• Enabled Always- Picklist mode is always enabled.
*
Disabled Always
Enabled Always

Decode Session Timeout

Parameter # 88h
This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in 0.1 second
increments from 0.5 to 9.9 seconds. The default timeout is 9.9 seconds.
To set a Decode Session Timeout, scan the bar code below. Next, scan two numeric bar codes from Appendix D, Numeric Bar Codes
that correspond to the desired on time. Single digit numbers must have a leading zero. For example, to set a Decode Session Timeout
of 0.5 seconds, scan the bar code below, then scan the 0 and 5 bar codes. To correct an error or change the selection, scan Cancel
on page D-4.

Decode Session Timeout

(00h)
(02h)
User Preferences 4-11
Enabled Out of Scanstand
(01h)