HID Keyboard FN1 Substitution
When enabled, this parameter allows replacement of any FN1 character in an EAN128 bar code with a Key
Category and value chosen by the user. See
Key Value.
HID Function Key Mapping
ASCII values under 32 are normally sent as control-key sequences. When this parameter is enabled, the keys in
bold are sent in place of the standard key mapping (see
bold entry remain the same whether or not this parameter is enabled.
FN1 Substitution Values on page 5-15
*
Disable Keyboard FN1 Substitution
Enable Keyboard FN1 Substitution
Table 8-2 on page
*
Disable Function Key Mapping
Enable Function Key Mapping
Radio Communications 4 - 13
to set the Key Category and
8-13). Table entries that do not have a