Econo Operation - Daikin F-Series Service Manual

SiEN12-710A
2.9

ECONO Operation

ECONO operation is a function which enables efficient operation by
lowering the maximum power consumption value.
" To start ECONO operation
1. Press "ECONO button" .
" To cancel ECONO operation
2. Press "ECONO button" again.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the operation stop button causes the settings to be
canceled, and the "
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit
(operating frequency).
• ECONO operation functions in AUTO, COOL, DRY, and HEAT modes.
• POWERFUL operation and ECONO operation cannot be used at the same time. Priority is given to the function of
whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used, when the level of power consumption is already low.
Operation Manual
• " " is displayed on the LCD.
• " " disappears from the LCD.
" disappears from the LCD.
ECONO
ON/OFF
TEMP
POWERFUL
MODE FAN SWING
QUIET MOLD PROOF SENSOR
ON CANCEL
OFF
TIMER
Instruction
1, 2
79