Instruction
" To use ON TIMER operation
•
1. Press "ON TIMER button".
2. Press "TIMER Setting button" until the
3. Press "ON TIMER button" again.
" To cancel the ON TIMER operation
4. Press "CANCEL button".
" To combine ON TIMER and OFF TIMER
ATTENTION
" In de following cases, set the timer again
•
After a breaker has turned OFF.
•
After a power failure.
•
After replacing batteries in the remote control
86
Check that the clock is correct.If not, set the
clock to the present time.
6:00 is displayed.
blinks.
time setting reaches the point you like.
•
Every pressing of either button increases
or decreases the time setting by 10
minutes. Holding down either button
changes the setting rapidly.
•
The TIMER lamp lights up.
•
The TIMER lamp goes off.
•
A sample setting for combining the two timers is shown below.
(Example)
Present time: 11:00 p.m.
(The unit operating)
OFF TIMER at 0:00 a.m
ON TIMER at 7:00 a.m
ECONO
TEMP
POWERFUL
MODE
FAN
QUIET
MOLD PROOF
ON
OFF
TIMER
Combined
SiEN12-710A
ON/OFF
SWING
SENSOR
1, 3
CANCEL
4
2
Operation Manual
•