SiEN12-710A
2.7
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling (heating) effect in
any operation mode. You can get the maximum capacity.
" To start POWERFUL operation
1. Press "POWERFUL button".
" To cancel POWERFUL operation
2. Press "POWERFUL button" again.
NOTE
" Note on POWERFUL operation
•
POWERFUL Operation cannot be used together with ECONO or QUIET Operation. Priority is given to the function of
whichever button is pressed last.
•
POWERFUL Operation can only be set when the unit is running. Pressing the operation stop button causes the settings
to be canceled, and the "
•
In COOL and HEAT mode
•
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased and the air flow rate be fixed to
the maximum setting. The temperature and air flow settings are not variable.
•
In DRY mode
•
The temperature setting is lowered by 2.5°C and the air flow rate is slightly increased.
•
In FAN mode
•
The air flow rate is fixed to the maximum setting.
•
When using priority-room setting
•
See "Note for multi system"
Operation Manual
•
POWERFUL operation ends in 20
minutes. Then the system automatically
operates again with the settings which
were used before POWERFUL
operation.
•
When using POWERFUL operation,
there are some functions which are not
available.
•
"
" is displayed on the LCD.
•
"
" disappears from the LCD.
" disappears from the LCD.
ECONO
ON/OFF
TEMP
POWERFUL
MODE
FAN
SWING
QUIET
MOLD PROOF
SENSOR
ON
CANCEL
OFF
TIMER
Instruction
1, 2
77