Sensor Board Unit (Sbu); When Reassembling - Ricoh M052 Service Manual

Scanner Unit

4.5.7 SENSOR BOARD UNIT (SBU)

1. Scanner top rear cover (
2. Exposure glass (
3. Bracket [A] (
⇒
4. Sensor board unit [A] (

When reassembling

Adjust the following SP modes after you replace the sensor board unit:
SP4–008 (Sub Scan Magnification Adj): See "Image Adjustment: Scanning"(
SP4–010 (Leading Edge Registration Adj): See "Image Adjustment: Scanning"(
SP4–011 (Main Scan Reg): See "Image Adjustment: Scanning"(
SP4–688 (DF: Density Adjustment): Use this to adjust the density level if the ID of outputs
made in the DF and Platen mode is different.
M052/M053/M054
p.4-26 "LED Board")
p.4-25)
x 5)
x 4, x 2)
4-30
Rev. 08/22/2013
p.4-7).
p.4-7)).
p.4-7).
SM