Browser Unit Update Procedure - Ricoh M052 Service Manual

Firmware Update
20. Exit the [User Tools/Counter] settings.
App2Me and all other running applications on the VM card must be shut down before
removing the VM card in order to update the firmware, back up NVRAM, install the
browser unit, or execute application move or undo with SP5873.
After the VM card is re-inserted, App2Me (and any other VM card applications used by
the customer) must be switched on after the machine is switched on.

5.14.5 BROWSER UNIT UPDATE PROCEDURE

1. Remove the SD slot cover [A] for SD cards (
2. Remove the VM card from SD slot 2 [B] (lower slot).
3. Turn the SD-card [C] label face of the browser unit to the left of the machine. Then push it
slowly into SD slot 2 (lower slot) until you hear a click.
4. Plug in and turn on the main power switch.
5. Push the "User Tools" key.
If an administrator setting is registered for the machine, step 5 and 6 are required.
Otherwise, skip to the step 7.
6. Push the "Login/ Logout" key.
7. Login with the administrator user name and password.
8. Touch "Extended Feature Settings" twice on the LCD.
9. Touch "Uninstall" on the LCD.
10. Touch the "Browser" line.
11. Confirmation message appears on the LCD.
12. Touch "Yes" to proceed.
13. Reconfirmation message appears on the LCD.
14. Touch "Yes" to uninstall the browser unit.
15. You will see "Uninstalling the extended feature... Please wait.", and then "Completed".
16. Touch "Exit" to go back to the setting screen.
M052/M053/M054
x 1).
5-194 SM