Ricoh M052 Service Manual page 607

IP-Fax Switch 01
No. FUNCTION
Select IP FAX Delay Level
Bit3 Bit2 Bit1
0 0 0
0 0 0
0-3
0 0 1
0 0 1
4-7 IP Fax preamble wait time setting
SM
Raise the level by selecting a higher setting
if too many transmission errors are occurring
Bit0 Setting
on the network.
If TCP/UDP is enabled on the network, raise
0 Level 0
this setting on the T.30 machine. Increasing
1 Level 1
the delay time allows the recovery of more
lost packets.
0 Level 2
If only UDP is enabled, increase the number
1 Level 3
of redundant packets.
Level 1~2: 3 Redundant packets
Level 3: 4 Redundant packets
Selects the preamble wait time.
[00 to 0f]
There are 16 values in this 4-bit binary
switch combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
95
Bit Switches
COMMENTS
M381