File Format Converter (D377); Installation Procedure - Ricoh M052 Service Manual

Controller Options

2.8.3 FILE FORMAT CONVERTER (D377)

Installation Procedure

Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces or printer enhanced option at one
time: (IEEE 802.11 a/g, g (Wireless LAN), Gigabit Ethernet, or File Format Converter).
1. Remove the I/F-slot cover [A] (
2. Install the file format converter [A] into the I/F-slot and then fasten it with screws.
3. Plug in and turn on the main power switch.
4. Check or set the following SP codes with the values shown below.
M052/M053/M054
x 2).
2-30 SM