Ricoh M052 Service Manual page 47

Paper Feed Unit TK1100 (M376)
1. Remove all tapes and cardboard on the paper feed unit [A].
2. Pull the paper tray part way out of the paper feed unit, remove the tape and cardboard in
the paper tray, and push the tray back in.
3. Set the machine [A] on the paper feed unit [B].
Two people are required to lift the machine.
When installing a second paper feed unit, place on the first paper feed unit before
placing the copier onto the pair of paper feed units
4. Remove the paper(s) tray from the paper tray unit(s).
5. Load paper into the paper tray(s). Adjust the side and end fences as necessary. If loading
1
8 / "x 14" paper, remove the end fence and set it into the special compartment.
2
6. Set the paper tray(s) back into the paper tray unit(s).
M052/M053/M054 2-16 SM