Ricoh M052 Service Manual page 528

Error Codes
Code Meaning
User Not Found on SMTP
14-06
Server (551)
Data Send to SMTP Server
14-07
Failed (4XX)
Data Send to SMTP Server
14-08
Failed (5XX)
Authorization Failed for
14-09
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
M381
Suggested Cause/Action
The designated user does not exist.
The designated user does not exist on the
SMTP server.
The designated address is not for use with
direct SMTP sending.
Failed to access the SMTP server because the
transmission failed.
PC not operating correctly.
SMTP server operating incorrectly
Network not operating correctly.
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Failed to access the SMTP server because the
transmission failed.
SMTP server operating incorrectly
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Software application error.
POP-Before-SMTP or SMTP authorization
failed.
Incorrect setting for file transfer
Number of broadcast addresses exceeded the
limit for the SMTP server.
The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
Transmission was cancelled because the
detected size of the file was too large.
Processing is interrupted because the user
pressed Stop.
16 SM