Adjustment Of Performance Monitor (Nju-63/64) - JRC JMA-9832-SA Instruction Manual

Exit 1 Press
The SETTING1 Menu will reappear.
2 Press
The Sub1 Menu will reappear.
3 Press
The Sub1 Menu will be closed.
Attention
Time correction is not available when the "ZDA" sentence of NMEA0183 is not received.

......Adjustment of Performance Monitor (NJU-63/64) ..................

Procedures 1 Set the radar to Master Radar when the Interswitch is installed.
2 Press
* Set the range to 16 to 18 NM when a waveguide is installed between the scanner unit and the
transmitter-receiver unit. (X band radar)
* Set the range to 18 NM when the transceiver unit is
incorporated in the scanner unit or in case of operating the S
band radar.
3 Carefully read Section 8.5, adjustments before opening
the ADJUST menu.
4 Press
"8.PM PRESET" will be set and the radar will automatically be
set to RM, OFF CENTER OFF, IR OFF, PROCESS OFF,
TGT ENH OFF, FUNCTION OFF and 24 NM range.
0
.
0
.
0
.
VRM1
to display VRM1 and set the range of VRM1 to 16 - 18 * NM.
8
.
8 – 47
A D J U S T
1.TUNE
0-63
2.BEARING
000.0
3.RANGE
0-999 510
4.ANTENNA HEIGHT
3. OVER 25m
5. ARPA
6. ISW
7. MBS
8.PM PRESET
0-127
0. E X I T
32
30