Use Of Automatic And Manual Acquisition Modes - JRC JMA-9832-SA Instruction Manual

......Use of Automatic and Manual Acquisition Modes

ACQ AUTO / ACQ MANUAL .......................................
Method of Operation
Execute manual target acquisition in the automatic acquisition mode, that is, in the condition that the
Automatic Acquisition mode is ON.
Use of Combined Auto/Manual Mode
In operation in both automatic and manual acquisition modes, the targets to which the operator has to
pay special attention shall be acquired manually and other targets shall be acquired automatically. If new
targets are acquired manually in excess of the maximum number of targets, the targets acquired
manually will continue to appear on the display until they moves away from the display edge, but the
targets acquired automatically will disappear in the order of more safety target.
5 – 13