Display Unit Ncd-4111; Coaxial Cable (Jma-9833-Sa) - JRC JMA-9832-SA Instruction Manual

......Display Unit NCD-4111 ......................................................

Cleaning of CRT Screen Surface
Attention
Do not wipe the CRT screen surface strongly with a piece of dry cloth or do not use gasoline or
thinner for cleaning. Otherwise, the screen surface may be damaged.
Dust accumulated on the CRT screen will reduce clarity and darken the video. For cleaning it, wipe it
with a piece of soft cloth (flannel or cotton). Do not wipe it strongly with a piece of dry cloth nor use
gasoline or thinner.

......Coaxial Cable (JMA-9833-SA) .............................................

(1) The coaxial pipe gland of the coaxial cable will be provided with perfect water-tight treatment
at the time of installation. Check it and ensure that no water leak occurs from the connection
parts. In particular it is recommended to apply paint to the coaxial pipe gland every six
months.
Attention
Do not give strong impact to the coaxial cable by hitting it with any tool or hammer.
Otherwise, it may be broken.
Do not put any heavy article on the coaxial cable. Otherwise, it may be broken.
Do not twist or pull the coaxial cable. Otherwise, it may be broken.
(2) For further details, refer to the Coaxial Cable Connection Procedures for the S band Radar.
7 – 5