JRC JMA-9832-SA Instruction Manual page 203

[ ] Vector Length: VECTOR TIME
2 2
The vector length of a target is proportional to its speed, and the vector time can be changed over in a
range of 1 to 60 minutes by used for ten-key.
The diagram below illustrates a vector length of a target for six minutes, and the tip of the vector
represents the target's position expected to reach six minutes later.
Setting Vector Time
Procedures 1 Press
The VECTOR TIME Menu will appear.
2 Set a vector time using
+
(When depressing
the vector time will be change rapidly.)
The vector time will appear at upper right of the radar display.
or,
Procedures 1 Press
2 Use the ten-key to enter the vector time.
ENT
3 Press
VECT
.
TIME
-
and . (Unit: minute)
+
or
1
from the VECTOR TIME Menu.
to enter the setting.
5 – 16
5.5 ARPA DATA DISPLAY
1.VECTOR TIME
-
continuously,
0.
.. ...
V E C T O R T I M E
1-60min 6
E X I T
5