Programming The Thermostats Menu; Thermostats Menu - Olivieri ERGOFLAM IDRO Installation Instructions Manual

THERMOSTATS MENU (these can only be displayed in the ERGOFLAM IDRO
version)
This allows the temperatures of the boiler pump and ambient thermostats to be
set.
The boiler pump thermostat is identified with the code t01 and can be set
between a minimum of 5ºC and a maximum of 85ºC. The ambient thermostat is
identified with the code t02 and has a regulating interval that goes from a
minimum of 15ºC to a maximum of 30ºC.

Programming the thermostats menu:

Press the MENU button, scroll through the various menus by means of the power
regulating buttons until the thermostats menu is reached (displayed as "tErM").
To access it, as explained in detail above, just press the SET button once. Now,
using the modify power buttons, it is possible to choose the thermostat value to
change. Having made the choice, press the SET button to enter modify mode
and the TEMPERATURE + and TEMPERATURE - buttons to set the new value. Now
press the SET button to save the setting and the TIMERTHERMOSTAT/ESC button to
exit the menu.
i The TIMERTHERMOSTAT/ESC button allows you to exit the mode menu at
any time without saving any change made.
Page | 59