Connection To Central Heating System - Olivieri ERGOFLAM IDRO Installation Instructions Manual

2.3 Connection to Central heating system (ERGOFLAM IDRO)
All water heating installations should be designed, before product installation,
and installed by
a competent heating engineer in conjunction with the requirements detailed in
(See Section 2 INSTALLATION)
This manual gives only give basic advice about system design. The full system
should be
designed with regard to individual requirements of the installation.
In order to be able to operate, our heater ERGOFLAM IDRO must be suitably
connected to a heating system. For this type of installation also, some simple
suggestions are provided that will undoubtedly be helpful when installing the
product (See Section 2 INSTALLATION)
Page | 23