Installation - Olivieri ERGOFLAM IDRO Installation Instructions Manual

2 INSTALLATION

INS.
TALLAZIONE
Before installation of this product please read these instructions fully.
It is very important to also understand the requirements of the UK and ROI
Building Regulations
BUILDING REGULATIONS - ENGLAND & WALES
BUILDING REGULATIONS - REPUBLIC of IRELAND
BUILDING REGULATIONS - NORTHERN IRELAND
BUILDING STANDARDS - SCOTLAND
BUILDING REGULATIONS - ISLE of MAN
Along with any local regulations that may apply. Should any conflict occur
between these instructions and these regulations the regulations shall apply.
Your local Building Control Officer would be happy to advise should questions
arise regarding
the requirements of the regulations.
Olivieri products should be fitted by a HETAS approved installer, or approved by
your local
Building Control Officer.
A faulty installation could cause danger to the inhabitants and structure of the
building.
All heating systems should be designed by a competent heating engineer, and
be suitable
for a Solid Fuel appliance.
HETAS- P0 Box 37, Bishops Cleeve, Glos GL52 9TB.. Tel No: 01242 673257
Approved Document J of the Building Regulations. Copies can be obtained from
HMSO. Advice is also available from Local Authority Building Control
Departments.
Part F of the Building Regulations: Technical Standards Copies can be obtained
from Scottish Building Standards Agency
Part L of the Building Regulations. Copies can be obtained from Building control
northern ireland.
Guidance Document J
The Department of Environment (ROI) .
- Part F
Document J
of the Building Regulations. Copies can be obtained from
– Document J
- TG Document J
- Part L
Page | 14