Table of Contents
Advertisement
3.5
User menu
Below is a description of the methods of programming the product. Access to
the parameters that can be managed by the user can be gained after pressing
the MENU button.
The user menus that can be displayed are:
"CRON" (TIMER): this allows the heater lighting/extinguishing intervals to be
programmed.
"RICE" (METHODS): this allows the appropriate method of operation of
combustion and heating to be chosen. Four methods of operation have been
programmed to make it easy for the user to use the product:
Method 1 - For operation in standard product mode;
Method 2 - For operating the product in the case where an accumulation
of pellets inside the pan is found;
Method 3 - For operating the heater with particularly damp pellet and
thus with slow combustion (possible accumulation of fuel);
Method 4 - For operating the heater in "economy" mode for greater fuel
saving.
"OROL" (CLOCK): this allows the time-schedule value and that of the current
date (day, month, year) to be set. Scrolling through the submenus is done by
pressing the MENU button, while access to a submenu to change its parameters
is gained by pressing the SET button.
"TERM" (THERMOSTAT): this enables the thermostat for ambient temperature and
the thermostat for the temperature of the water in the boiler to be set. It is a
menu that can be seen by the user only in ERGOFLAM IDRO.
Page | 52
Hide quick links:
Advertisement
Table of Contents
