Methods Menu; Programming The Methods Menu; Clock Menu; Programming The Clock Menu - Olivieri ERGOFLAM IDRO Installation Instructions Manual

METHODS MENU

This menu allows the user to be able to choose between four different methods
of product operation preset inside the board and described in detail at the
beginning of this paragraph.

Programming the methods menu:

Press the MENU button, scroll through the various menus using the power
regulating buttons and finally enter the fuel methods menu by pressing the SET
button. Press the SET button again to enter modify mode.
Using the TEMPERATURE + and TEMPERATURE - buttons, select the method to be
used (the value selected is flashing) and press SET to save the selection.
To exit this menu press the TIMERTHERMOSTAT/ESC button.

CLOCK MENU

In this menu it is possible to change the clock settings and choose the day of the
week.

Programming the clock menu:

Press the MENU button, scroll through the various menus by means of the power
regulating buttons and finally enter the clock menu by pressing the SET button.
Press the SET button again to enter modify mode. By means of the modify
temperature buttons it is possible to choose whether to change the hour,
minutes or the day (the value that can be changed is flashing). Adjustment is
carried out using the POWER + and POWER - buttons.
To save the settings, press the SET button. To exit this menu press the
TIMERTHERMOSTAT/ESC button.
Any other menus displayed are for the exclusive use of technical
personnel and it is strictly forbidden to change their content.
Page | 58